When using Superstick as a stake out pole the inner pole must be fully inserted into the outer pole and locked into place.

Instructions for adjusting the length

	1. Push the lever all the way forward and adjust Superstick to the desired length.
	2. Once adjusted pull the lever back.
	3. Lock Superstick in position by pulling the lever all the way back. (Once locked, the inner pole will not move, turn, slide, or rotate)

To easily change an attachment fully press the stainless steel button, rotate the attachment left or right, then pull it outward.

The transitional fitting will come from the factory pre-adjusted, but if adjustment is needed, push the lever all the way forward to the unlocked position and turn the screw counterclockwise to tighten or clockwise to loosen it. DO NOT OVER TIGHTEN. Make sure that the inner pole moves freely when the locking mechanism is in the unlocked position.